Recent original articles published in journal indexed in SCI, SCI-E, AHCI and SSCI
Yıl | Künye | Dizin | Çeyrek | Bağlantı |
2024 | Kizilcaoglu, S., Kilicarslan, A., & Kurtbas, İ. (2024). Thermodynamic analysis of a cascade vapour compression refrigeration system integrated Linde-Hampson cycle. International Journal of Exergy, 43(4), 375-391. | SCI/SCI-E | Q2 | |
2024 | Tore, H., & Kilicarslan, A. (2024). Experimental exergy destruction analysis of an air to air heat pump operating in cooling mode. International Journal of Exergy, 43(4), 306-316. | SCI/SCI-E | Q2 | |
2024 | Pehlivan, L., & Baykasoğlu, C. (2024). In-plane crushing behavior and energy absorption of CFRP honeycombs with different core topologies. Thin-Walled Structures, 205, 112566. | SCI/SCI-E | Q1 | |
2024 | Baykasoğlu, C., Baykasoğlu, A., Erdin, M. E., & Cetin, E. (2024). Compression behavior and design optimization of triggered glass fiber reinforced polymer square tubes. Polymer Composites, 45(17), 15776-15792. | SCI/SCI-E | Q1 | |
2024 | Baykasoğlu, C., Baykasoğlu, A., Erdin, M. E., & Cetin, E. (2024). Effect of triggering on the axial crushing behavior of GFRP tubes: Experimental investigation and optimization. Polymer Composites, 45(6), 5504-5521. | SCI/SCI-E | Q1 | |
2024 | Baykasoğlu, C., Baykasoğlu, A., & Cetin, E. (2024). Multi-objective crashworthiness optimization of square aluminum tubes with functionally graded BCC lattice structure filler. International Journal of Crashworthiness, 29(1), 80-94. | SCI/SCI-E | Q3 | |
2024 | Akdag, U., Yukselturk, M., Palancioglu, H., & Caliskan, S. (2024). Heat transfer enhancement in a square channel with a set of triangular prisms: an experimental study. Experimental Heat Transfer, 37(4), 389-403. | SCI/SCI-E | Q2 | |
2024 | Caliskan, S., Soydan, I. B., Seyitoglu, S. S., & Guler, F. (2024). Experimental analysis of photovoltaic/thermal system under composite climate in terms of exergy efficiency. Int. J. Exergy, 44(1), 65. | SCI/SCI-E | Q1 | |
2024 | Solmaz, H., Polat, S., Calam, A., Arslan, T. A., & Akbulut, F. (2024). Combustion Performance of Ethanol, Methanol and Butanol in a Low Compression Ratio HCCI Engine. Arabian Journal for Science and Engineering, 1-16. | SCI/SCI-E | Q2 | |
2024 | Ceritbinmez, F., Kanca, Y., Tuna, A., & Kanca, E. (2024). Investigation of the wear behavior of FeNi36 alloy cut by WEDM method under different loads. Aircraft Engineering and Aerospace Technology, 96(1), 136-143. | SCI/SCI-E | Q2 | |
2024 | ACIMERT, Ö. B., Okur, B. B., Dayauç, A. K., Küçükömeroğlu, T., & Kanca, Y. (2024). Structural, Mechanical and Tribological Properties of Hydroxiapatite Reinforced Ti13Nb13Zr/HA Composite Produced by Friction Stir Process (FSP). Metallurgical and Materials Transactions B, 1-11. | SCI/SCI-E | Q2 | |
2024 | Dayauc, A. K. (2024). The electrochemical and tribological behavior of carbide and carbonitride films in bio-simulated fluid. International Journal of Refractory Metals and Hard Materials, 124, 106827. | SCI/SCI-E | Q1 | |
2024 | Cetin, E. (2024). Energy absorption of thin-walled multi-cell tubes with DNA-inspired helical ribs under quasi-static axial loading. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(10), 607. | SCI/SCI-E | Q3 | |
2024 | Kocabas, G. B., Yalcinkaya, S., Cetin, E., & Sahin, Y. (2024). Energy Absorption of a Novel Lattice Structure‐Filled Multicell Thin‐Walled Tubes Under Axial and Oblique Loadings. Advanced Engineering Materials, 26(20), 2400483. | SCI/SCI-E | Q2 | |
2024 | Tunay, M. (2023). Bending behavior of 3D printed sandwich structures with different core geometries and thermal aging durations. Thin-Walled Structures, 111329. | SCI/SCI-E | Q1 | |
2024 | SCI/SCI-E | Q2 | ||
2024 | Demirtaş, M. S., & Saha, M. C. (2024). Engineering highly aligned continuous nanofibers via electrospinning: A comprehensive study on collector design, electrode geometry, and collector speed. Express Polymer Letters, 18(8), 851-867. | SCI/SCI-E | Q2 | |
2023 | Caliskan, S., Seyitoğlu, S.S. (2023). Investigating the influence of flexible flags on heat transfer through experimental analysis, Experimental Heat Transfer. | SCI/SCI-E | Q1 | |
2023 | Tore, H., Kilicarslan, A., (2023). Experimental Exergy Destruction Analysis of an Air To Air Heat Pump Operating in Cooling Mode. International Journal of Exergy. | SCI/SCI-E | Q3 | Link |
2023 | Kanca, Y., Gokcekaya, O., Günen, A. (2023). Sliding Wear and Friction Performance of Pack-Borided Co–28Cr–6Mo Alloy in Physiological Lubricants. Metallurgical and Materials Transactions A, 1-16. | SCI/SCI-E | Q1 | |
2023 | Tunay, M., Cetin, E. (2023). Energy absorption of 2D auxetic structures fabricated by fused deposition modeling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 500. | SCI/SCI-E | Q2 | |
2023 | Mert, H., Deniz, C.U., Baykasoglu C. (2023). Adsorptive separation of CH4, H2, CO2, and N2 using fullerene pillared graphene nanocomposites: Insights from molecular simulations. Journal of Molecular Modeling, 29, 315. | SCI/SCI-E | Q3 | |
2023 | Korkmaz, Y., Cetin, E., Gültekin, K. (2023). Enhancement of saltwater ageing behavior of nanocomposites and lap joints with boron nanoparticles. International Journal of Adhesion and Adhesives, 103479. | SCI/SCI-E | Q1 | |
2023 | Cetin, E., Tagni Fossi, C. (2023). Experimental investigation on mechanical strength of adhesively bonded 3D-printed joints under hygrothermal conditions using Taguchi method. International Journal of Adhesion and Adhesives, 103472. | SCI/SCI-E | Q1 | |
2023 | Öge M., Küçük Y., Özdemir Öge T., Günen A., Kanca Y., Gök M.S. (2023). Effect of boriding on high temperature tribological behavior of CoCrMo alloy. Tribology International 187, 108697. | SCI/SCI-E | Q2 | |
2023 | Okutan, M., Boran F., Ergün A., Kanca Y., Özkahraman B., Deligöz H. (2023). Hydrophobic surface modification and characterization of melamine foam. Turkish Journal of Chemistry 47 (3), 591-604. | Q3 | ||
2023 | S Şevik, B Çiçek, Ö Özdilli, T Aydoğmuş, Z Özer. (2023). Thermal performance analysis of aluminum, copper, and graphene nanoplatelets-doped nanocomposite heat sinks manufactured via stereolithography. Applied Thermal Engineering 226, 120315. | SCI/SCI-E | Q1 | |
2023 | Abuşka, M., Şevik, S., Özdilli, Ö. (2023). A comparative experimental performance evaluation of solar air collector having absorber plate with convex oval-trench dimple. Heat and Mass Transfer, 98, 065923. | Q2 | ||
2023
| Demirtas, M.S., Avcioglu, E. (2023). Ambient relative humidity effects on mechanical properties of FDM 3D printed PLA components. Physica Scripta, 98, 065923. | SCI/SCI-E | Q2 | |
2023 | Arslan, O. Arslan, A.E., Kurtbas, İ. (2023). Exergoeconomic and exergoenvironmental based multi-criteria optimization of a new geothermal district heating system integrated with thermal energy storage driven heat pump. Journal of Building Engineering, 73, 106733. | SCI/SCI-E | Q1 | |
2023 | Kanca, Y., Uçgun, M.C., Günen, A. (2023). Microstructural and tribological behavior of Pack-Borided Ni-Based Hastelloy C-276 superalloy. Metallurgical and Materials Transactions A, 54,671-684. | SCI/SCI-E | Q2 |
2023 | Kanca, Y., Özkahraman, B. (2023). An investigation on tribological behavior of methacrylated κ-carrageenan and gellan gum hydrogels as a candidate for chondral repair. Journal of Biomaterials Applications. | Q3 | ||
2023 | Mert Eren M., Celebi A.T., İçer E., Baykasoğlu C., Mugan A., Yücel T., Yıldız, E. (2023). Biomechanical behavior evaluation of resin cement with different elastic modulus on porcelain laminate veneer restorations using micro-CT-based finite element analysis. Materials 16 (6), 2378. | SCI/SCI-E | Q1 | |
2023 | Baykasoğlu, C., Baykasoğlu, A., Cetin, E. (2023). Multi-objective crashworthiness optimization of square aluminum tubes with functionally graded BCC lattice structure filler. International Journal of Crashworthiness, 1-15. | SCI/SCI-E | Q3 | |
2023 | Tunay, M., Baykasoğlu, C., Akyildiz, O., & C. To, A. (2023). A fully coupled thermal–microstructural–mechanical finite element process model for directed energy deposition additive manufacturing of Ti–6Al–4V. Science and Technology of Welding and Joining, 38(2),118-127 | SCI/SCI-E | Q1 | |
2023 | Cetin, E., Baykasoğlu, A., Erdin, M. E., & Baykasoğlu, C. (2023). Experimental investigation of the axial crushing behavior of aluminum/CFRP hybrid tubes with circular-hole triggering mechanism. Thin-Walled Structures, 182, 110321. | SCI/SCI-E | Q1 | |
2022 | Polat S., Calam A., Ardebili S.M.S., Şahin F., Boroiu A.A., and Solmaz H. (2022). Operating Range, Performance and Emissions of an HCCI Engine Fueled with Fusel Oil/Diethyl Ether: An Experimental Study. Sustainability, 14 (23),15666. | SCI/SCI-E | Q2 | |
2022 | Tore, H. & Kilicarslan, A. (2022). Energy and exergy analyses of an air source heat pump operating in cooling mode. International Journal of Exergy, 39(4). | SCI/SCI-E | Q3 | |
2022 | Celebi, A. T., Uzel, G., Oylumlu, E., Baykasoglu, C., Mugan, A., Joly, S., & Ciraci, C. (2022). Computational Modeling of T Cell Hypersensitivity during Coronavirus Infections Leading to Autoimmunity and Lethality. Computational and mathematical methods in medicine, 2022. | SCI/SCI-E | Q2 | |
2022 | Caliskan, S., Şevik, S., & Özdilli, Ö. (2022). Heat transfer enhancement by a sinusoidal wavy plate having punched triangular vortex generators. International Journal of Thermal Sciences, 181, 107769. | SCI/SCI-E | Q1 | |
2022 | Caliskan, S., Dogan, A., & Sahin, U. R. (2022). Effect of new punched vortex generators in a rectangular channel on heat transfer using Taguchi method. Experimental Heat Transfer, 35(5), 611-636. | SCI/SCI-E | Q2 | |
2022 | Acımert Ö. B., ÇAVLAN S., Dayauç, A. K., Hopkins L. (2022). Ta Effect on Structural, Mechanical and Tribological Properties of TiCN Coatings. Journal of Materials Engineering and Performance | SCI/SCI-E | Q2 | |
2022 | SCI/SCI-E | Q3 | ||
2022 | SCI/SCI-E | Q3 | ||
2022 | Tunalioglu, M. S., & Agca, B. V. (2022). Wear and Service Life of 3-D Printed Polymeric Gears. Polymers, 14(10), 2064. | SCI/SCI-E | Q1 | |
2022 | Seyitoglu, S. S., Avcioğlu, E., Haboğlu, M.R. (2022). Determination of the biogas potential of animal waste and plant location optimisation: A case study. International Journal of Energy Research. | SCI/SCI-E | Q1 | |
2022 | Kanca, Y. (2022). Microstructural characterization and dry sliding wear behavior of boride layers grown on Invar-36 superalloy. Surface and Coatings Technology, 449, 128973. | SCI/SCI-E | Q1 | |
2022 | Şenel, M. C., Kanca, Y., & Gürbüz, M. (2022). Reciprocating sliding wear properties of sintered Al-B4C composites. International Journal of Minerals, Metallurgy and Materials, 29(6), 1261-1269. | SCI/SCI-E | Q2 | |
2022 | Kılıç Suloğlu, A., Özkahraman, B., Özbaş, Z., Bayrak, G., Perçin, I., Kanca, Y. & Tamahkar, E. (2022). Evaluation of kappa carrageenan and gelatin based sponges for dental applications. Chemical Papers, 1-11. | SCI/SCI-E | Q3 | |
2022 | Karataş, F., Koyuncu, İ., Tuna, M., Alçın, M., Avcioglu, E., & Akgul, A. (2022). Design and implementation of arrhythmic ECG signals for biomedical engineering applications on FPGA. The European Physical Journal Special Topics, 231(5), 869-884. | SCI/SCI-E | Q2 | |
2021 | Baykasoglu, C., Mert, H., & Deniz, C. U. (2021). Grand canonical Monte Carlo simulations of methane adsorption in fullerene pillared graphene nanocomposites. Journal of Molecular Graphics and Modelling, 106, 107909. | SCI/SCI-E | Q3 |
|
2021 | Baykasoğlu, A., & Baykasoğlu, C.Weighted superposition attraction-repulsion (WSAR) algorithm for truss optimization with multiple frequency constraints. In Structures (Vol. 30, pp. 253-264). | SCI/SCI-E | Q2 |
|
2021 | Deniz, C. U., Mert, H., & Baykasoglu, C. (2021). Li-doped fullerene pillared graphene nanocomposites for enhancing hydrogen storage: A computational study. Computational Materials Science, 186, 110023. | SCI/SCI-E | Q3 | |
2021 | Erol, D., & Çalışkan, S. (2021). The examination of performance characteristics of a beta‐type Stirling engine with a rhombic mechanism: The influence of various working fluids and displacer piston materials. International Journal of Energy Research, 45(9), 13726-13747. | SCI/SCI-E | Q3 | |
2021 | Erol, D., Doğan, B., & Çalışkan, S. (2021). The investigation of an energetic and exergetic performance characteristics of a beta-type Stirling engine with a rhombic drive mechanism. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43(4), 1-19. | SCI/SCI-E | Q3 | |
2021 | Tunalioglu, M. S., & Torun, T. (2021). The investigation of wear on three-dimensional printed spur gears. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235(6), 2027-2034. | SCI/SCI-E | Q3 | |
2020 | Baykasoğlu, C., Akyildiz, O., Tunay, M., & To, A. C. (2020). A process-microstructure finite element simulation framework for predicting phase transformations and micro hardness for directed energy deposition of Ti6Al4V. Additive Manufacturing, 35, 101252. | SCI/SCI-E | Q1 | |
2020 | Cetin, E., & Baykasoğlu, C. (2020). Crashworthiness of graded lattice structure filled thin-walled tubes under multiple impact loadings. Thin-walled Structures, 154, 106849. | SCI/SCI-E | Q1 | |
2020 | Mert, H., Deniz, C. U., & Baykasoglu, C. (2020). Monte Carlo simulations of hydrogen adsorption in fullerene pillared graphene nanocomposites. Molecular Simulation, 46(8), 650-659. | SCI/SCI-E | Q3 | |
2020 | Baykasoğlu, A., Baykasoğlu, C., & Cetin, E. (2020). Multi-objective crashworthiness optimization of lattice structure filled thin-walled tubes. Thin-Walled Structures, 149, 106630. | SCI/SCI-E | Q1 | |
2020 | Adil, B., & Cengiz, B. (2020). Optimal design of truss structures using weighted superposition attraction algorithm. Engineering with Computers, 36(3), 965-979. | SCI/SCI-E | Q1 |
|
2020 | Polat, S., Yücesu, H. S., Uyumaz, A., Kannan, K., & Shahbakhti, M. (2020). An experimental investigation on combustion and performance characteristics of supercharged HCCI operation in low compression ratio engine setting. Applied Thermal Engineering, 180, 115858. | SCI/SCI-E | Q1 | |
2020 | Polat, S. (2020). An experimental investigation on combustion, performance and ringing operation characteristics of a low compression ratio early direct injection HCCI engine with ethanol fuel blends. Fuel, 277, 118092. | SCI/SCI-E | Q1 |
|
2020 | Polat, S., Solmaz, H., Uyumaz, A., Calam, A., Yılmaz, E., & Serdar Yucesu, H. (2020). An experimental research on the effects of negative valve overlap on performance and operating range in a homogeneous charge compression ignition engine with RON40 and RON60 fuels. Journal of Engineering for Gas Turbines and Power, 142(5), 051007. | SCI/SCI-E | Q3 |
2020 | Yilmaz, E., Polat, S., Solmaz, H., Aksoy, F., & Cinar, C. (2020). Thermodynamic comparison of crank-drive and rhombic-drive mechanisms for a single cylinder spark ignition engine. Journal of the Faculty of Engineering and Architecture of Gazi University, 35(2). | SCI/SCI-E | Q4 | |
2020 | Keles, A. (2020). The substrate effect on mechanical, adhesion and tribological properties of CrCN films deposited by magnetron sputtering. International Journal of Surface Science and Engineering, 14(4), 274-287. | SCI/SCI-E | Q3 |
|
2020 | Günen, A., Karahan, İ. H., Karakaş, M. S., Kurt, B., Kanca, Y., Çay, V. V., & Yıldız, M. (2020). Properties and corrosion resistance of AISI H13 hot-work tool steel with borided B4C powders. Metals and Materials International, 26(9), 1329-1340. | SCI/SCI-E | Q3 | |
2019 | Cetin, E., & Baykasoğlu, C. (2019). Energy absorption of thin-walled tubes enhanced by lattice structures. International Journal of Mechanical Sciences, 157, 471-484. | SCI/SCI-E | Q1 | |
2019 | Baykasoğlu, C., Baykasoğlu, A., & Çetin, M. T. (2019). A comparative study on crashworthiness of thin-walled tubes with functionally graded thickness under oblique impact loadings. International Journal of Crashworthiness. | SCI/SCI-E | Q3 | |
2019 | Pehlivan, L., & Baykasoğlu, C. (2019). An experimental study on the compressive response of CFRP honeycombs with various cell configurations. Composites Part B: Engineering, 162, 653-661. | SCI/SCI-E | Q1 | |
2019 | Caliskan, S., Dogan, A., & Kotcioglu, I. (2019). Experimental investigation of heat transfer from different pin fin in a rectangular channel. Experimental Heat Transfer, 32(4), 376-392. | SCI/SCI-E | Q2 | |
2019 | Khalaji, M. N., Kotcioglu, I., Caliskan, S., & Cansiz, A. (2019). The Second Law Analysis of Thermodynamics for the Plate–Fin Surface Performance in a Cross Flow Heat Exchanger. Journal of Heat Transfer, 141(1). | SCI/SCI-E | Q3 | |
2019 | Polat, S., Solmaz, H., Yılmaz, E., Calam, A., Uyumaz, A., & Yücesu, H. S. (2020). Mapping of an HCCI engine using negative valve overlap strategy. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42(9), 1140-1154. | SCI/SCI-E | Q3 | |
2019 | Polat, S., Özdilli, Ö., & Cizmeci, H. (2019). An estimation of incylinder pressure based on lambda and engine speed in hcci engine using artificial neural networks. Fresenius Environ. Bull, 28, 3568-3576. | SCI/SCI-E | Q4 | |
2019 | Efeoğlu, İ., Totık, Y., Keleş, A., Gülten, G., Ersoy, K., & Durkaya, G. (2019). The adhesion and tribological properties of c-BN films deposited by high power impulse magnetron sputtering. Ceramics International, 45(3), 3000-3006. | SCI/SCI-E | Q1 | |
2019 | Erdin, M. E., & Ozdilli, O. (2019). Deep drawing of polymer coated metal sheets. Journal of Mechanical Science and Technology, 33(11), 5383-5392. | SCI/SCI-E | Q3 | |
2019 | Ozdilli, O., Erdin, M. E., & Erdogan, M. (2019). Investigation of effects of variable blankholder force on deep drawing process of 6082 aluminum alloy. Fresenius Environ. Bull., 28(4A), 3324-3332. | SCI/SCI-E | Q4 | |
2018 | Seyitoglu, S. S., & Kilicarslan, A. (2018). Investigation of the component exergy efficiencies of a two stage vapour compression cycle. International Journal of Exergy, 27(1), 43-61. | SCI/SCI-E | Q4 | |
2018 | Baykasoglu, C., Akyildiz, O., Candemir, D., Yang, Q., & To, A. C. (2018). Predicting microstructure evolution during directed energy deposition additive manufacturing of Ti-6Al-4V. Journal of Manufacturing Science and Engineering, 140(5). | SCI/SCI-E | Q2 | |
2018 | Cicek, H., Keles, A., Totik, Y., & Efeoglu, I. (2018). Adhesion and multipass scratch characterization of Ti: Ta-DLC composite coatings. Diamond and Related Materials, 83, 80-86. | SCI/SCI-E | Q2 | |
2018 | Kurt, B., Günen, A., Kanca, Y., Koç, V., Gök, M. S., Kırar, E., & Askerov, K. (2018). Properties and tribologic behavior of titanium carbide coatings on AISI D2 steel deposited by thermoreactive diffusion. Jom, 70(11), 2650-2659. | SCI/SCI-E | Q3 | |
2018 | Günen, A., Kanca, Y., Karahan, İ. H., Karakaş, M. S., Gök, M. S., Kanca, E., & Çürük, A. (2018). A comparative study on the effects of different thermochemical coating techniques on corrosion resistance of STKM-13A steel. Metallurgical and Materials Transactions A, 49(11), 5833-5847. | SCI/SCI-E | Q3 | |
2018 | Günen, A., Kanca, E., Karakaş, M. S., Koc, V., Gök, M. S., Kanca, Y. & Demir, M. (2018). High temperature wear behavior of the surface-modified externally cooled rolls. Surface and Coatings Technology, 348, 130-141. | SCI/SCI-E | Q2 | |
2018 | Kanca, Y., Milner, P., Dini, D., & Amis, A. A. (2018). Tribological evaluation of biomedical polycarbonate urethanes against articular cartilage. Journal of the mechanical behavior of biomedical materials, 82, 394-402. | SCI/SCI-E | Q2 | |
2018 | Kanca, Y., Milner, P., Dini, D., & Amis, A. A. (2018). Tribological properties of PVA/PVP blend hydrogels against articular cartilage. Journal of the mechanical behavior of biomedical materials, 78, 36-45. | SCI/SCI-E | Q2 | |
2018 | Işik, M. F., Haboğlu, M. R., Yilmaz, C., & Yilmaz, E. N. (2018). Design and implementation of real time monitoring and control system for distributed robotic systems supported with IOS/android application. Tehnički vjesnik, 25(2), 423-428. | SCI/SCI-E | Q4 | |
2017 | Seyitoglu, S. S., Dincer, I., & Kilicarslan, A. (2017). Energy and exergy analyses of hydrogen production by coal gasification. International Journal of Hydrogen Energy, 42(4), 2592-2600. | SCI/SCI-E | Q2 | |
2017 | Celebi, A. T., Icer, E., Eren, M. M., Baykasoglu, C., Mugan, A., & Yildiz, E. (2017). Thermal-stress analysis of ceramic laminate veneer restorations with different incisal preparations using micro-computed tomography-based 3D finite element models. Journal of the Mechanical Behavior of Biomedical Materials, 75, 302-313. | SCI/SCI-E | Q2 | |
2017 | Baykasoğlu, A., & Baykasoğlu, C. (2017). Multiple objective crashworthiness optimization of circular tubes with functionally graded thickness via artificial neural networks and genetic algorithms. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231(11), 2005-2016. | SCI/SCI-E | Q3 | |
2017 | Yataganbaba, A., Ozkahraman, B., & Kurtbas, I. (2017). Worldwide trends on encapsulation of phase change materials: A bibliometric analysis (1990–2015). Applied energy, 185, 720-731. | SCI/SCI-E | Q1 | |
2017 | Çalışır, T., Çalışkan, S., Kılıç, M., & Başkaya, Ş. (2017). Numerical investigation of heat transfer using impinging jets on triangular and square ribbed roughened walls. | SCI/SCI-E | Q4 | |
2017 | Çalışır, T., Çalışkan, S., Kilic, M., & Başkaya, Ş. (2017). Numerical investigation of flow field on ribbed surfaces using impinging jets. Journal of the Faculty of Engineering and Architecture of Gazi University, 32. | SCI/SCI-E | Q4 | |
2017 | Cicek, H., Baran, O., Keles, A., Totik, Y., & Efeoglu, I. (2017). A comparative study of fatigue properties of TiVN and TiNbN thin films deposited on different substrates. Surface and Coatings Technology, 332, 296-303. | SCI/SCI-E | Q2 | |
2017 | Keleş, A., Çiçek, H., Baran, Ö., Totik, Y., & Efeoğlu, İ. (2017). Determining the critical loads of V and Nb doped ternary TiN-based coatings deposited using CFUBMS on steels. Surface and Coatings Technology, 332, 168-173. | SCI/SCI-E | Q2 | |
2017 | Baran, Ö., Keleş, A., Çiçek, H., Totik, Y., & Efeoğlu, İ. (2017). The mechanical and tribological properties of Ti [Nb, V] N films on the Al-2024 alloy. Surface and Coatings Technology, 332, 312-318. | SCI/SCI-E | Q2 | |
2017 | Isik, M. F., Haboglu, M. R., & Yanmaz, H. (2017). Design and Implementation of a Closed Loop Electronic Driver Circuit for the Air Curtains Used in Aspirators. | SCI/SCI-E | Q4 |
Recent original articles published in journal indexed inESCI
Yıl | Künye | Dizin | Bağlantı |
2023 | Seyitoglu, S.S., Tozlu, Ö.F., Avcıoglu,E. (2023). Indoor Lighting Conversion Approach for Sustainable Energy Efficiency Applications in Campus Buildings: Hitit University Engineering Faculty Study | ESCI | |
2023 | Polat S., Bulut A., Akbulut F., Eroğlu T. N. (2023). Comparison of Combustion Parameters and Homogeneity of Full and Direct Injection Homogeneous Charge Compression Ignition Engine Under Supercharger Condition. SAE International Journal of Fuels and Lubricants,04-16-02-0010, 16(2):2023 Doi: 10.4271/04-16-02-0010 | ESCI | |
2022 | 2022 Seyitoğlu, S.S., Kilicarslan, A. (2022). The Related Study Tendencies in the Field of Gasification: A Bibliometric Approach. Gazi University Journal of Science | ESCI | |
2020 | Polat, S., Solmaz, H., Calam, A., & Yilmaz, E. (2020). Estimation of the COVIMEP Variation in a HCCI Engine. Politeknik Dergisi, 23(3), 721-727. | ESCI | |
2017 | Tunalioglu, M. S., Tuc, B., & Erdin, M. E. (2017). Effect of coating materials on wear in internal Gears. International Journal of Engineering, 30(11), 1792-1799. | ESCI | |
2017 | Ozcan, H., & Seyitoglu, S. S. (2017). Comparative thermodynamic assessment of various super-and trans-critical working fluids for low temperature power generation applications. Politeknik Dergisi, 20(4), 915-921. | ESCI |
An article published in a journal indexed in international field indexes defined by ÜAK
Yıl | Künye | Dizin | Bağlantı |
2024 | Keleş, M., & Baykasoglu, C. (2024). Akı Konsantransyonlu Halbach Dizilimli Bir Eşeksenli Manyetik Dişli Tasarımı ve Analizi. Gazi Journal of Engineering Sciences, 10(3), 457-471. | Diğer Uluslararası | |
2024 | Tunalıoğlu, M. Ş., & Keser, M. Experimental Investigation of Flow Drilling and Flow Tapping of Thin-Walled Square and Circular Hollow Sections. International Journal of Automotive Science And Technology, 8(2), 188-200. | Diğer Uluslararası | |
2024 | Cetin, E., & Seyitoglu, S. S. (2024). A bibliometric overview of research on auxetic structures: Trends and patterns. International Journal of Automotive Science and Technology, 8(1), 65-77. | Diğer Uluslararası | |
2024 | Seyitoglu, S. S. (2024). The Influence of Road Transport on Carbon Footprint: A Case Study of the Black Sea Region. International Journal of Automotive Science And Technology, 8(1), 37-43. | Diğer Uluslararası | |
2024 | Demirtaş, M. S., Avcıoğlu, E., & Güloğlu, G. E. (2024). Farklı Kimyasal Yüzey İyileştirme İşlemlerinin Pirinç Kabuğu Epoksi Kompozit Malzemelerin Mekanik Özelliklerine Etkisi. Akdeniz Mühendislik Dergisi, 2(1), 1-12. | Diğer Uluslararası | |
2023 | Tunay, M., & Bodur, M. F. (2023). Bending Behavior of 3D Printed Polymeric Sandwich Structures with Various Types of Core Topologies. International Journal of Automotive Science And Technology, 7(4), 285-294. | Diğer Uluslararası | |
2023 | Kocabaş, G. B., Çetin, E., YALCİNKAYA, S., & Şahin, Y. (2023). Experimental Comparison of the Energy Absorption Performance of Traditional Lattice and Novel Lattice Filled Tubes. International Journal of Automotive Science and Technology, 7(3), 207-212. | ||
2022 | Cetin, E. (2022). Tensile strength of adhesively bonded and hybrid (bonded/riveted) dissimilar single-lap joints. International Journal of Automotive Science And Technology, 6(4), 398-403. | Diğer Uluslararası | |
2020 | Baran, O., Urvasızoğlu, G., Keleş, A., Atatol, M., Totik, Y., & Ertaş, Ü. (2020). The structural properties of ta doped dlc coatings for the dental applications using hipims. | Diğer Uluslararası | |
2020 | Yılmaz, T. A., Keleş, A., Şenöz, G. M. L., Totik, Y., & Efeoğlu, İ. (2020). The Structural and Mechanical Properties of MoS2-TiB2 Coated on AA7075 Produced by Powder Metallurgy Method. Brilliant Engineering, 1(2). | Diğer Uluslararası | |
2017 | Kilicarslan, A., & Qatu, M. (2017). Exhaust gas analysis of an eight cylinder gasoline engine based on engine speed. Energy Procedia, 110, 459-464. | Diğer Uluslararası |
|
2017 | Uyumaz, A., Fahrettin, B. O. Z., Yilmaz, E., Solmaz, H., & Polat, S. (2017). Taşıt egzoz emisyonlarını azaltma yöntemlerindeki gelişmeler. Mehmet Akif Ersoy Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 8(Özel (Special) 1), 15-24. | Diğer Uluslararası | |
2017 | Işık, M. F., Haboğlu, M. R., & Yartaşı, B. (2017). Smart Phone Based Energy Monitoring System for 3 Phase Induction Motors. International Journal of Electronics and Electrical Engineering, 5(1). | Diğer Uluslararası | |
2017 | Isik, M. F., Yartasi, B., & Haboglu, M. R. (2017). Applicability of Li-Fi technology for industrial automation systems. International Journal of Electronics and Electrical Engineering, 5(1), 21-25. | Diğer Uluslararası |
An article published in a national peer-reviewed journal indexed in TR Dizin
Yıl | Künye | Dizin | Bağlantı |
2023 | Gödek E., Şevik S., Özdilli Ö. (2023). Pattern and filament optimization for 3D-printed reinforcements to enhance the flexural behavior of cement-based composites. Journal of Sustainable Construction Materials and Technologies 8 (1), 66-77. | TR-Dizin | |
2023 | Kanca, Y. (2023). Effects of normal load and sliding distance on the dry sliding wear characteristics of Invar-36 superalloy. Erzincan University Journal of Science and Technology, 16(1), 258-272. | ||
2023 | Kanca, Y. (2023). Mechanical and wear properties of CoNiAlSiSb and CoNiAlSiIn ferromagnetic shape memory alloys: An Experimental Assessment. Hittite Journal of Science and Engineering 10 (1), 63-68. | TR-Dizin | |
2022 | Halis S., Solmaz H., Polat Seyfi, Yücesu H. S. (2022). Numerical Study of the Effects of Lambda and Injection Timing on RCCI Combustion Mode. International Journal of Automotive Science and Technology, 6(2), 120 – 126. | TR-Dizin | |
2022 | Cetin, E., & Baykasoğlu, C. (2022). Bending Response of Lattice Structure Filled Tubes under Transverse Loading. Hittite Journal of Science and Engineering, 9(2), 151-158. | TR-Dizin | |
2022 | Kanca, Y., Avcioğlu, E., Hopkins, L., & Bilge, E. (2022). Mechanical and tribological analysis of polyacrylamide/alginate hybrid hydrogels for potential cartilage treatment. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, 22(1), 252-261. | TR-Dizin | |
2022 | Pala, M. A., Çimen, M. E., Yildiz, M. Z., Çetinel, G., Avcioğlu, E., & Alaca, Y. Cnn-based approach for overlapping erythrocyte counting and cell type classification in peripheral blood images. Chaos Theory and Applications, 4(2), 82-87. | TR-Dizin | |
2021 | Seyitoglu, S. S., & Avcioğlu, E. (2021). An investigation for the potential of biogas to be produced from animal waste in Çorum. Gazi University Journal of Science PART C: Design and Technology, 9(2), 246-261. | TR-Dizin | |
2020 | Keleş, M., & Baykasoglu, C. (2020). Bir kanatçık tahrik sistemi yapısal özelliklerinin sistem performansına etkilerinin sayısal ve deneysel olarak incelenmesi. Gazi Mühendislik Bilimleri Dergisi, 6(1), 40-53. | TR-Dizin | |
2020 | Güngör, M. A., & Polat, S. (2020). Comparison of the edge detection methods according to fake edge and area calculation performances. International Journal of Automotive Science And Technology, 4(3), 132-137. | TR-Dizin | |
2020 | Keleş, A. (2020). D2 takım çelik üzerine kaplanmış tin filmin adezyon ve yorulma özelliklerinin belirlenmesi. Erzincan University Journal of Science and Technology, 13(2), 511-517. | TR-Dizin |
|
2020 | Tunalioğlu, M. Ş. (2020). Farklı tip uçucu küllerin kauçuğun mekanik özelliklerine etkisinin deneysel incelenmesi. Avrupa Bilim ve Teknoloji Dergisi, (18), 790-804. | TR-Dizin | |
2019 | Erol, D., & Çalışkan, S. (2019). Comparative study on the performance of different drive mechanisms used in a beta type Stirling engine through thermodynamic analysis. International Journal of Automotive Engineering and Technologies, 8(2), 44-60. | TR-Dizin | |
2018 | Kilicarslan, A., & Kiris, M. (2018). Exergy destruction analysis of a gas turbine power plant. Hittite Journal of Science and Engineering, 5(4), 339-346. | TR-Dizin | |
2018 | Baykasoglu, C., & Mugan, A. (2018). Failure analysis of graphene sheets with multiple stone-thrower-wales defects using molecular-mechanics based nonlinear finite element models. Hittite Journal of Science and Engineering, 5(1), 19-24. | TR-Dizin | |
2018 | Özdilli, Ö., & Erdin, M. E. (2018). Comparison of common deep drawing steel sheets in terms of blank holder force and friction conditions. International Journal Of Automotive Science And Technology, 2(3), 36-41. | TR-Dizin | |
2018 | Özgedik, A., BALCI, S. M., Erdin, M. E., & Kopraman, Y. (2018). Elektro erozyon ile işlemede işleme haznesine uygulanan titreşimlerin geometrik elektrot aşınması üzerindeki etkilerinin incelenmesi. Gazi University Journal of Science Part C: Design and Technology, 6(2), 308-318. | TR-Dizin | |
2017 | Töre, H. & Kilicarslan, A. (2017). Experimental investigation of cooling performance a heat pump for near azeotropic refrigerant R404A. Hittite Journal of Science and Engineering, 4(2), 131-136. | TR-Dizin | |
2017 | Polat, S., Yücesu, H. S., Kannan, K., Uyumaz, A., Solmaz, H., & Shahbakhthi, M. (2017). Experimental comparison of different injection timings in an HCCI engine fueled with n-heptane. International Journal of Automotive Science and Technology, 1(1), 1-6. | TR-Dizin | |
2017 | Uyumaz, A., Solmaz, H., Fahrettin, B. O. Z., YILMAZ, E., & Polat, S. (2017). Reaktif kontrollü sıkıştırma ile ateşlemeli (RCCI) bir motorda lamdanın yanma karakteristiklerine etkileri. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 17(3), 1146-1156. | TR-Dizin | |
2017 | Efeoğlu, İ., Totik, Y., Keleş, A., Ersoy, K., & Durkaya, G. (2017). Synthesis and investigation of structural-mechanical-tribological properties of c-BN based BN thin films. Journal of Boron, 2(1), 11-17. | TR-Dizin | |
2017 | Tunalioglu, M. S., & Gemalmayan, N. (2017). Analysis of scoring resistance on coated spur gears by considering surface roughness. Hittite Journal of Science and Engineering, 4(2), 145-150. | TR-Dizin | |
2017 | Isik, M. F., Haboglu, M. R., & Ercan, I. S. İ. K. (2017). A monitoring and control system integrated with smart phones for the efficient use of underground water resources in agricultural product growing. Hittite Journal of Science and Engineering, 4(2), 99-103. | TR_Dizin |
